FAA STC category
Engine and powerplant STCs
Engine, turbine, exhaust, nacelle, inlet, and related powerplant changes. This directory contains 1,512 selected records listed with status Current in the June 30, 2026 FAA DRS snapshot and links every entry to its source.
Increase of the engine power of the PT6A-67F engine to 1600 SHP for takeoff power and 1550 SHP for maximum continuous power.
FAA holder: Momentum Aeronautics Holdings, LLC
Removal of engine fire detection system.
FAA holder: Momentum Aeronautics Holdings, LLC
Replace existing Pratt & Whitney (P & W) Model R-985 or R-1340 reciprocating engine installation installation with P & W (Canada) turbopropeller engine (Model PT6A-6B, -11, -11AG, -15AG, -20, -20A, -20B, -6/C20, -21, -27, -28, -34, -34AG, or -135) and Hartzell propeller (Model HC-BJTN-3 Hub and Model T10282 (+4) or T10282(N) (+4) Blades).
FAA holder: Hershey Flying and Spraying Service, Inc.
Installation of Teledyne Continental Motors Model IO-520-D engine and either a McCauley Model D3A34C401/90DFA-10 or Hartzell Model PHC-C3YF-1RF/F8468A( )-6R or PHC-C3YF-1RF/F7691( ) or PHC-G3YF-1RF/F8468A( )-6Ror PHC-G3YF-1RF/F7691( ) 3-blade propeller.
FAA holder: Air Plains Services Corporation
Installation of JASCO Model 7555-1 alternator kit on P&W R-985 series engine.
FAA holder: Kenmore Air Harbor LLC
Installation of ENode Engine Data Acquisition Unit & IONode Digital Data Recorder.
FAA holder: Aerospace Design & Compliance LLC
Installation of a Teledyne Continental Motors Model IO-550-D engine and either a Hartzell Model PHC-C3YF-1RF/F8468A( )-6R or PHC-C3YF-1RF/F7691( ) or PHC-G3YF-1RF/F8468A( )-6R or PHC-G3YF-1RF/F7691( )or McCauley Mod D3A34C401/90DFA-10 3-blade propeller.
FAA holder: Air Plains Services Corporation
Installation of an engine Inlet Barrier Filter System.
FAA holder: Aerometals Inc.
Installation of Chuck Ney Enterprises, Inc. CNE IO-470-C/N-MOD Model Engine (STC SE02261CH).
FAA holder: Cygnet Aerospace Corp.
Installation of a Lycoming O-360 150HP or 160HP engine and engine mount.
FAA holder: Airmotive Components LLC
Installation of Engine Vibration Indicator.
FAA holder: Icarus Aero Inc.
Installation of of Enode Engine Data Acquisition Unit & Ionode Digital Data Recorder.
FAA holder: Aerospace Design & Compliance LLC.
Installation of Tail Floodlights on Boeing 727 Engine Pylons.
FAA holder: The Boeing Company
Replacement of the original Pratt and Whitney PT6A-64 engine with a Pratt and Whitney PT6A-66D engine.
FAA holder: Blackhawk Modifications LLC
Installation of an engine modified per STC SE0417CH.
FAA holder: Western Skyways Aircraft Modifications Inc.
Install Powerflow Systems, Inc., tuned exhaust system to enhance engine performance.
FAA holder: Power Flow Systems Inc.
Install Power Flow Systems, Inc. Improved Performance Exhaust System.
FAA holder: Power Flow Systems Inc.
Installation of an improved performance exhaust system.
FAA holder: Power Flow Systems Inc.
Installation of an engine Inlet Barrier Filter (IBF).
FAA holder: Aerometals Inc.
Fabrication of replacement engine exhaust system assembly (P/N PA18ESA).
FAA holder: Power Flow Systems Inc.
Installation of replacement engine exhaust system assembly (P/N P55C180ESA).
FAA holder: Power Flow Systems Inc.
Installation of exhaust gas extractors on Pratt & Whitney Canada PT6A-21, -28, -29, -34, -34B, -135, or -135A turboprop engines.
FAA holder: Metrea Special Aerospace ISR Inc.
Installation of engine low oil pressure warning system.
FAA holder: Metrea Special Aerospace ISR Inc.
Installation of full turning contoured engine exhaust stacks on Pratt & Whitney Canada PT6A-38, PT6A-41, or PT6A-42 engines.
FAA holder: Metrea Special Aerospace ISR Inc.
Installation of Airesearch Model TE-0659, P/N C295001-0101 Turbocharger.
FAA holder: Metal Innovations Inc. dba MII Aero
Installation of the Pratt & Whitney PT6A-135A engine.
FAA holder: MT-Propeller Entwicklung GmbH
Installation of modified exhaust system in lieu of original components.
FAA holder: Dakota Cub Aircraft Inc.
Installation of an engine modified per STC SE04349CH.
FAA holder: SureFly Partners Ltd.
Installation of engine crankcase seal.
FAA holder: Ly-Con Rebuilding Company
Installation of engine crankcase seal.
FAA holder: Ly-Con Rebuilding Company
Installation of engine crankcase seal.
FAA holder: Ly-Con Rebuilding Company
Installation of American Aviation Inc. redesigned engine exhaust stacks.
FAA holder: American Aviation Inc.
Installation of a Cockpit Combustion Heater Exhaust Extension on the Right-Hand Side (RHS) of the Fuselage.
FAA holder: KASI Aviation Services Inc.
Installation of B&C Specialty Products Model BC 320-( ) Engine Starter.
FAA holder: B & C Specialty Products Inc.
Installation of B&C Specialty Products lightweight (10.2 pounds) engine starter PN BC315-100-1(12 volt) or PN BC315-100-3(24 volt) on engines with ring gears having 122 teeth and PN BC315-100-2 (12 volt) or PN BC315-100-4 (24 volt) on engines with ring gears having 149 teeth.
FAA holder: B & C Specialty Products Inc.
Installation of Arrow OH-58A+ engine out warning system.
FAA holder: Arrow Falcon by Edgefield Manufacturing
Installation of Engine Preheat Kit, P/N TA3123-1 for 115 volt application.
FAA holder: Hartzell Propeller LLC
The installation of a Pratt & Whitney PT6A-140AG engine, Avia propeller V508H/108B/A or Hartzell propeller HC-B4TN-3C/T10702N(S), fuel system and aerodynamic modifications on S2R-T34 and S2R-H80 airplanes, and installation of rudder aileron interconnect on S2R-H80 airplanes,.
FAA holder: Cascade Aircraft Conversions LLC
Installation of an air to air intercooler in the engine induction system downstream of the turbocharger. (TU206G S/N U20603522 thru U20606921 and up).
FAA holder: Western Skyways Aircraft Modifications Inc.
Installation of air to air intercooler in engine induction system.
FAA holder: Western Skyways Aircraft Modifications Inc.
Installation of a modified exhaust tail pipe.
FAA holder: Aerospace Welding Minneapolis Inc.
Installation of a modified exhaust system.
FAA holder: Aerospace Welding Minneapolis Inc.
Installation of modified exhaust system. S/N 27-2505 and up.
FAA holder: Aerospace Welding Minneapolis Inc.
Installation of a modified exhaust collector assembly.
FAA holder: Aerospace Welding Minneapolis Inc.
Installation of exhaust system.
FAA holder: Aerospace Welding Minneapolis Inc.
Installation of a modified exhaust system.
FAA holder: Aerospace Welding Minneapolis Inc.
Installation of a modified exhaust system.
FAA holder: Aerospace Welding Minneapolis Inc.
Installation of a modified exhaust system.
FAA holder: Aerospace Welding Minneapolis Inc.
Installation of Engine Preheat Kit p/n TA2925-1 for 115 volt application.
FAA holder: Hartzell Propeller Inc.
Installation of Engine Preheat Kit, p/n TSP6CYL-2927-115 for 115 volt application.
FAA holder: Hartzell Propeller Inc.
Installation of engine fuel purge system-engine shutdown.
FAA holder: PC6-AU23 Spares LLC
Installation of fuel collector tank - engine shutdown fuel discharge.
FAA holder: PC6-AU23 Spares LLC
Installation of Teledyne Continental E225-8 engine modified.
FAA holder: CheckSix AeroSolutions, LLC
Installation of the Honeywell EDG-100 Connected Engine Data Access System.
FAA holder: Honeywell International Inc.
Installation of nacelle overwing storage lockers and lower flap fairing.
FAA holder: Raisbeck Engineering Inc.
Installation of exhaust stack fairings.
FAA holder: Raisbeck Engineering Inc.
Installation of nacelle overwing stowage lockers and lower flap fairing.
FAA holder: Raisbeck Engineering Inc.
Installation of nacelle overwing storage lockers and lower flap fairing.
FAA holder: Raisbeck Engineering Inc.
Install engine fluids collection tank.
FAA holder: Raisbeck Engineering Inc.
Installation of nacelle wing lockers.
FAA holder: Raisbeck Engineering Inc.
Installation of turbocharged Lycoming O-540-E4B5 engine.
FAA holder: TALCO Aviation
Installation of Turbocharged Lycoming 1O-720-A1A engine.
FAA holder: TALCO Aviation
Installation of turbocharged Continental IO-470-D engine.
FAA holder: TALCO Aviation
Installation of Turbocharged Lycoming IO-360-A1B engine.
FAA holder: TALCO Aviation