Aircraft STC directory
Cessna Aircraft 172Q STCs
The Jun 30, 2026 FAA DRS snapshot contains 92 selected supplemental type certificates with status Current whose public applicability data names the Cessna Aircraft 172Q. Use it to identify modification scope and recorded holders—not to determine serial-number effectivity, compatibility, installation approval, or commercial availability.
Modification demand surface
Recorded holders
Recently revised 172Q STCs
Showing the 92 most recently revised records. Each entry links to the FAA source and separates public approval data from private commercial claims.
Installation of alternate avionics support assembly.
FAA holder: Radiorax Aviation Systems LLC
Installation of replacement flap trailing edge bulbs with AOG Drawing.
FAA holder: Athena Aircraft, LLC
Installation of replacement control surface skin panels.
FAA holder: Athena Aircraft, LLC
Installation of FlightLogic Synthetic Vision Electronic Flight Information System (EFIS-SV).
FAA holder: Genesys Aerosystems Inc.
Installation of Baumann Model BF-2550 floats.
FAA holder: Baumann Floats LLC
Installation of Flight Boss LTD S-RPE-CN Rudder Pedal Extensions.
FAA holder: Flight Boss Ltd.
Install BRS-172 parachute recovery system.
FAA holder: Ballistic Recovery Systems Inc.
Installation of a cooling shroud on engine driven dry air pumps.
FAA holder: McFarlane Aviation Inc
Installation of an 18 gallon fuel tank in the aft baggage compartment and fuel transfer system.
FAA holder: Griggs Aircraft Refinishing LLC
Installation of the Concorde FLA or VRSLA RG series batteries.
FAA holder: Concorde Battery Corporation
Incorporation of bushing on carburetor hot air box control arm.
FAA holder: Dynamic Propeller
Installation of the Precise Flight stand-by vacuum system (SVS).
FAA holder: Precise Flight Inc
Installation of a Jasco #6540 (35a.) Alternator Kit or a Jasco #6555 (50a.) Alternator Kit.
FAA holder: Hartzell Engine Technologies, LLC
Installation of Brittain Model CSA-1 Stability Augmentation System.
FAA holder: Brittain Industries, Inc
Installation of Brittain Industries Model B2C Autopilot System.
FAA holder: Brittain Industries, Inc
Installation of GX50/60 GPS Navigator, Capstone configured MX20 Multi-Function Display and UAT transceiver.
FAA holder: Garmin International Inc
Installation of Inline Air Filter Kit, P/N CV1J4-C.
FAA holder: Aerotech Components Inc
Install SAF-T-STOP auxiliary seat stop device.
FAA holder: Glen A Florence, Aero Technologies, Inc.
Installation of Becker Avionics SAR DF-517 Search and Rescue Direction Finding System.
FAA holder: Rhotheta USA Inc.
Installation of a Digital Engine Monitoring system.
FAA holder: Ultra Electronics Flightline Systems
Installation of Doyn fiberglass wheel fairings.
FAA holder: D'Shannon Products Ltd.
Installation of an engine electronic digital tachometer, Model P-1000.
FAA holder: Horizon Instruments Inc
Installation of the VNS 1000 Voice Navigation System.
FAA holder: VNS Incorporated
Installation of FlightLogic Synthetic Vision Electronic Flight Information System (EFIS-SV).
FAA holder: Chelton Flight Systems Inc.
Fabrication and installation of F. Atlee dodge Aircraft Services, Cessna Tie-Down clamp.
FAA holder: F. Atlee Dodge Aircraft Services, LLC
Installation of North American Surveillance Systems Strut Mount and Optional Cloud Cap Technologies TASE / TASE Dou Gimbals.
FAA holder: North American Surveillance Systems LLC
Installation of Glareshield per FAA Approved Ashby Glareshield Master Drawing List.
FAA holder: Aircraft Spruce and Specialty Co.
Installation of EDO 89-2000 floats modified.
FAA holder: X-Winds S.T.O.L. Inc.
Installation of Knots 2U, Ltd Wheel and Body Fairings.
FAA holder: Knots 2U Ltd.
Installation of the Aero Vent Cabin Ventilation System.
FAA holder: Knots 2U Ltd.
Installation of external aerodynamic Vortelator Kit on airplanes.
FAA holder: Aircraft Development Co
Installation of Cleveland Main Wheels and Brakes.
FAA holder: F Atlee Dodge Aircraft Service
Installation of the Courtesy Light Kit.
FAA holder: Knots 2U Ltd.
Installation of electrically driven vacuum pump.
FAA holder: Aero Safe Corporation
Installation of NPX138N-XXX FM Transceiver.
FAA holder: Northern Airborne Technology Ltd
Installation of VENTUBE pilot/co-pilot overhead fresh air valves. (195 SERIES LC-126A; LC-126B; LC-126C).
FAA holder: Soros Inc. a Texas Corporation
Installation of Graphic Engine Monitors (GEM) Models GEM-610 and GEMINI 1200.
FAA holder: Insight Instrument Corporation
Installation of Electronics International model UBG-16 or UBG-16T bar graph engine analyzer.
FAA holder: Electronics International
Installation of flap gap seal per Aircraft Development Co. Drawing List 114-1 stamped FAA approved with a date of April 27, 2005 or later. Conformity data for Drawing List 114-1 is derived from Drawing List 114-1 Revision C and STC s SA1484CE, SA1490CE, SA1491CE, SA1492CE, SA1493CE, SA1494CE, and SA1495CE.
FAA holder: Aircraft Development Co
Installation of aileron gap seal per Aircraft Development Co. Drawing List 115-1 stamped FAA approved with a date of April 27, 2005 or later. Conformity data for Drawing List 115-1 is derived from Drawing List 115-1 Revision D and STC s SA1484CE, SA1490CE, SA1491CE, SA1492CE, SA1493CE, SA1494CE, and SA1495CE.
FAA holder: Aircraft Development Co
Modification of right hand side door to provide an openable window.
FAA holder: Ellis & Associates CADD/Technical Illustrations
Installation of Wulfsberg P-2000 and/or C-2000-RT-2000 transceiver system.
FAA holder: Wulfsberg Electronics Division
Installation of canvas hammock seat.
FAA holder: Stoots Aviation/David A. Stoots
Installation of Aero Advantage ADV200 series vacuum pump per Aero Advantage Drawing Number ADVMSI 500 latest FAA approved revision.
FAA holder: Aero Holdings Ltd. a Texas limited partnership
Installation of CO Guardian Remote Carbon Monoxide Detector Instrument.
FAA holder: CO Guardian LLC
Cockpit sunvisor installation.
FAA holder: Rosen Sunvisor Systems LLC
Installation of CO Guardian Carbon Monoxide Detector Instrument.
FAA holder: CO Guardian LLC
Installation of Fibre Glass Reinforced Plastic Nacelle Fairing, Trade Name 'Exhaust Fairing".
FAA holder: Maple Leaf Aviation Ltd
Installation of Technisonic Industries Ltd OSAT-100 Airborne Position/Data Communicator.
FAA holder: Technisonic Industries Limited
Replacement of right front seat with stretcher.
FAA holder: Aviation Fabricators Inc
Installation of vortex generators on wings and tail surfaces.
FAA holder: Micro AeroDynamics Inc
Installation of fiberglass replacement wing tips.
FAA holder: Aircraft Development Co