Skip to content
Flight controls

STC SA2497CE

FAA DRS lists SA2497CE as Current · Reissued, held by Curry Aviation LLC, for Textron Aviation 185C, Textron Aviation A185F, and Textron Aviation 185, and 5 more aircraft configurations. Recorded change: Establishes the compatibility to install the flap actuated aileron droop system per STC SA1441WE and the wing leading edge cuffs, drooped tips and stall fences per STC SA968CE. Snapshot dated June 30, 2026.

FAA-listed holder
Curry Aviation LLC
Aircraft configurations
8
FAA revision date
FAA status
Current · Reissued

Recorded modification

What the FAA record covers

SA2497CE identifies the approval, recorded holder, named aircraft, and modification scope. It does not confirm kit availability, serial-number effectivity, data rights, price, or installation authority.

Applicability

Aircraft named in FAA DRS

Named aircraft: Textron Aviation 185C, Textron Aviation A185F, and Textron Aviation 185, and 5 more aircraft configurations. Confirm the approved model list, serial effectivity, configuration, and certificate revision.

Textron Aviation 185C3A24Textron Aviation A185F3A24Textron Aviation 1853A24Textron Aviation 185A3A24Textron Aviation 185B3A24Textron Aviation 185D3A24Textron Aviation 185E3A24Textron Aviation A185E3A24

Buyer checks

Confirm before sourcing

Related flight controls STCs

SA253NWFlight controls

Installation of the Mark II performance system, including recontoured wing leading edge, recontoured flap leading edge, wing vortex generator removal, installation of wing stall strips and other minor refinements in accordance with Avcon Master Drawing List No. 1084 dated November 16, 2010, or later FAA approved revision. 350 Knot Vmo authorized if equipped in accordance with Avcon Master Drawing List No. 1084 dated November 16, 2010 or later FAA approved revision. An FAA Approved Airplane Flight Manual Supplement is required for each model.

FAA holder: Avcon Industries Inc

View record
SA841NWFlight controls

Installation of the Mark II performance system, including recontoured flap leading edge, wing vortex generator removal, installation of wing stall strips and other minor refinements in accordance with Avcon Master Drawing List No. 1085 dated November 16, 2010, or later FAA approved revision. 350 Knot Vmo authorized if equipped in accordance with Avcon Master Drawing No. 1085 dated November 16, 2010, or later FAA approved revision. An FAA approved Airplane Flight Manual Supplement is required for each model.

FAA holder: Avcon Industries Inc

View record