FAA STC category

Landing gear and brakes STCs

Landing gear, brake, wheel, tire, skid, and undercarriage changes. This directory contains 568 selected records listed with status Current in the June 30, 2026 FAA DRS snapshot and links every entry to its source.

Showing 361–480 of 568Page 4 of 5

SR01924ATLanding gear and brakesRevised Jun 6, 2011

Manufacture of Low Skid or High Skid Landing Gear.

FAA holder: Bell Helicopter Textron Inc.

View record

SA2747SWLanding gear and brakesRevised May 10, 2011

Installation of lockable, full swivel tail wheel per Drawing FA7027H, dated 5/11/78, or later FAA approved revision.

FAA holder: Turbine Conversions Ltd

View record

SA11045SCLanding gear and brakesRevised Apr 25, 2011

Modification of the nose wheel shimmy damper in accordance with Down Time Aviation, LLC, drawing number DTA-TBM700-3252 (sheets 1-7); sheets 1-3 and 5-6 Revision A; sheet 4 Revision B; and sheet 7 Revision IR, all dated 12/7/2010 or later FAA approved revision. The aircraft is to be maintained per the Modification Instructions and Instructions for Continued Airworthiness, Document Number 32-52-01, Revision IR, dated January, 2011, or later FAA accepted revision.

FAA holder: Down Time Aviation LLC

View record

SR01697AT-DLanding gear and brakesRevised Feb 9, 2011

Replacement Low or High Skid Tubes and Lightweight Flotation Skid Tubes in accordance with Aeronautical Accessories, Inc. Drawing List Report AA-98007, Revision I, dated July 18, 2006, and installation per Report AA-98006, Revision D, dated March 31, 2003, or per Report AA-99024, Revision F, dated November 29, 2005, or later DAS approved revisions.

FAA holder: Bell Helicopter Textron Inc.

View record

SR09330RCLanding gear and brakesRevised Feb 9, 2011

Installation of Replacement Low and High Skid Landing Gear Crosstubes in accordance with data listed on Aeronautical Accessories, INC. drawing list, Report No. AA-00004, Revision C, dated October 2, 2001 or later FAA approved drawing list revision.

FAA holder: Bell Helicopter Textron Inc.

View record

SR09532RC-DLanding gear and brakesRevised Feb 9, 2011

Installation of reduced-weight skid tubes for high skid landing gear in accordance with Master Drawing List AA-07045 Rev. A dated October 2, 2008, or later FAA approved revision.

FAA holder: Bell Helicopter Textron Inc.

View record

SA02867NYLanding gear and brakesRevised Dec 21, 2010

Installation of the Lord Corporation Nose Wheel Shimmy Damper Part Number SE-1088-1 in accordance with Lord Corporation Installation Drawing List Document No. SE-1088-IDL, Revision IR, dated 4/22/2008 or later FAA approved revisions.

FAA holder: Lord Corporation

View record

SA02376AKLanding gear and brakesRevised Dec 12, 2010

Replacement of tricycle landing gear with conventional (tail-wheel) landing gear.

FAA holder: Stoots Aviation David S. Stoots

View record

ST02321LALanding gear and brakesRevised Oct 25, 2010

Installation and Replacement of Brake Components.

FAA holder: NASCO Aircraft Brake Inc

View record

SA1177SWLanding gear and brakesRevised Jul 15, 2010

Installation of revised main landing gear doors.

FAA holder: Airline Fueling Inc.

View record

SA331SWLanding gear and brakesRevised Jul 15, 2010

Electric landing gear system.

FAA holder: Airline Fueling Inc.

View record

SA423SWLanding gear and brakesRevised Jul 15, 2010

Fiberglass landing gear doors.

FAA holder: Airline Fueling Inc.

View record

SA02373AKLanding gear and brakesRevised Jun 14, 2010

Installation of heavy duty landing gear.

FAA holder: Dakota Cub Aircraft, Inc.

View record

SA02304AK-DLanding gear and brakesRevised Apr 23, 2010

Installation of Airglas P/N LH4000F main wheel skis and optional Burl's Aircraft P/N 3400-10-23 tail ski.

FAA holder: Airglas Inc.

View record

ST03832ATLanding gear and brakesRevised Feb 10, 2010

Installation of Nose Landing Gear Viewport with relocation of the viewport from aft of cargo bulkhead to forward of the cargo bulkhead.

FAA holder: Federal Express Corp

View record

SH1018CELanding gear and brakesRevised Feb 2, 2010

Install landing gear damper piston.

FAA holder: Kinzie Industries Inc.

View record

SH1047CELanding gear and brakesRevised Feb 2, 2010

Install modified landing gear damper.

FAA holder: Kinzie Industries Inc.

View record

ST02264LALanding gear and brakesRevised Nov 25, 2009

Installation and replacement of steel brake components.

FAA holder: NASCO Aircraft Brake Inc

View record

SA836WELanding gear and brakesRevised Oct 5, 2009

Hydro-Aire Mark II anti-skid braking system to reduce required landing field length.

FAA holder: Alaska Airlines Inc

View record

SA5-2Landing gear and brakesRevised Sep 11, 2009

Installation of conventional tail wheel type landing gear from Piper PA-20 in place of tricycle type.

FAA holder: Aircraft Innovations, LLC

View record

SA538ALLanding gear and brakesRevised Sep 11, 2009

Installation of modified landing gear (PA-18 type) with main landing gear legs lengthened6 inches.

FAA holder: Aircraft Innovations, LLC

View record

SA548ALLanding gear and brakesRevised Sep 11, 2009

Installation of Piper PA-18 type landing gear.

FAA holder: Aircraft Innovations, LLC

View record

SA1644SOLanding gear and brakesRevised Aug 4, 2009

Installation of main landing gear down-lock indicator system.

FAA holder: Pemco Aeroplex Inc

View record

SH5889NMLanding gear and brakesRevised Jul 15, 2009

Installation of landing gear skid tubes.

FAA holder: Heli-Support Inc.

View record

SR10117LA-DLanding gear and brakesRevised Jul 15, 2009

Installation of landing gear skid tubes.

FAA holder: Heli-Support Inc.

View record

SA03708ATLanding gear and brakesRevised Jun 2, 2009

Replacement of the Main Landing Gear Housing.

FAA holder: Aeronautical Design Service Pty Ltd The

View record

SA02698NYLanding gear and brakesRevised May 19, 2009

Main Landing Gear Compression Block installation.

FAA holder: Thunder Bay Aviation Ltd

View record

ST1001SOLanding gear and brakesRevised May 5, 2009

Installation of Federal Express Corp. brake mount flange.

FAA holder: JSF Aviation Services Inc.

View record

SA02339AKLanding gear and brakesRevised Mar 24, 2009

Installation of main gear gravel deflectors, PN GDQ-100, on the main landing gear of the Quest Kodiak 100.

FAA holder: Aero Twin Inc

View record

SA02344AKLanding gear and brakesRevised Mar 17, 2009

Manufacture and installation of nose gear tire scraper, on the nose landing gear of the Quest Kodiak 100.

FAA holder: Aero Twin Inc

View record

SA00021MCLanding gear and brakesRevised Jan 23, 2009

Installation of Michelin Main Landing Gear Radial Tires, P/N M16301.

FAA holder: Michelin North America Inc.

View record

SA1113NWLanding gear and brakesRevised Oct 14, 2008

Installation of Cleveland wheels, tires (6 X 6) and brake assembly.

FAA holder: Burl's Aircraft LLC

View record

ST02159LALanding gear and brakesRevised Sep 23, 2008

Installation and replacement of Steel Brake Components.

FAA holder: NASCO Aircraft Brake Inc

View record

SA2381NMLanding gear and brakesRevised Aug 19, 2008

Installation of Knots 2U, Ltd Wheel and Body Fairings.

FAA holder: Knots 2U Ltd.

View record

SA02546NYLanding gear and brakesRevised Jul 9, 2008

Installation of the Lord Corporation Nose Wheel Shimmy Damper Part Number SE-1090-1.

FAA holder: Lord Corporation

View record

SA8031NMLanding gear and brakesRevised Jul 2, 2008

Installation of locking tail wheel strut.

FAA holder: 195 FACTORY LLC, The

View record

SA4546NMLanding gear and brakesRevised Jun 10, 2008

Installation of Cleveland Part No. 040-19900 Tail Wheel Assembly and 10 x 3.50 4 tire and tube. Installation.

FAA holder: 195 FACTORY LLC, The

View record

ST02385NYLanding gear and brakesRevised May 29, 2008

De-activation of Tire Pressure Indication System.

FAA holder: Corporation Logic Air Inc.

View record

SH1861SOLanding gear and brakesRevised May 27, 2008

Installation of external cargo rack and work platform between the skid gears.

FAA holder: Haverfield International

View record

ST01294CHLanding gear and brakesRevised May 27, 2008

Installation of a parking brake control assembly.

FAA holder: AeroControlex Group Inc

View record

ST01477WI-DLanding gear and brakesRevised May 16, 2008

Installation of the M45 Updated Nose Wheel Steering and Spoiler/Spoileron Computers.

FAA holder: Learjet Inc

View record

SA4463NMLanding gear and brakesRevised Apr 30, 2008

Installation of Ryan Model ST-A type main landing gear.

FAA holder: Helicorp Inc.

View record

SA4-1322Landing gear and brakesRevised Apr 14, 2008

Fire proofing of main landing gear doors to comply with Airworthiness Directive 60-05-02.

FAA holder: Flying Tiger Line Inc

View record

ST108CHLanding gear and brakesRevised Apr 7, 2008

Installation of wheel flange abrasion liner.

FAA holder: AIREPAIR LLC

View record

SA00555DELanding gear and brakesRevised Feb 21, 2008

Replacement of inboard main landing gear door with an aerodynamic fairing.

FAA holder: Aircraft Restoration Corporation

View record

ST02151NYLanding gear and brakesRevised Jan 30, 2008

Installation of Dunlop Aircraft Tyres Limited Main Landing Gear Tyre(s) P/N DR32118T and Nose Landing Gear Tyre(s) P/N DR32212T.

FAA holder: Wilkerson Co Inc

View record

SA01033WILanding gear and brakesRevised Jan 22, 2008

Replacement of original outboard main landing gear doors with a one-piece monolithic machined metal door.

FAA holder: Machining Programming Manufacturing Inc

View record

SA00902WILanding gear and brakesRevised Jan 4, 2008

Replacement of original main landing gear doors with monolithic machined gear doors.

FAA holder: MPM Inc.

View record

SA573ALLanding gear and brakesRevised Oct 31, 2007

Install Cleveland wheel assembly 40-28 and Cleveland brake assembly30-18.

FAA holder: STOL Aviation LLC c/o Tom Csatari

View record

SA574ALLanding gear and brakesRevised Oct 31, 2007

Installation of Cleveland 40-28, 6.00 - 6 main wheel assemblies and Cleveland 30-18 brake assemblies.

FAA holder: STOL Aviation LLC c/o Tom Csatari

View record

ST02436NYLanding gear and brakesRevised Jul 20, 2007

Installation of Main Wheel Stowage.

FAA holder: Elisen Technologies Inc.

View record

SA01516SELanding gear and brakesRevised Jul 16, 2007

Replacement of the Scott Master Brake Cylinder (Non-Vented Diamphram type) with a Steve s Aircraft Model SA6-01 Master Cylinder with a vented reservoir.

FAA holder: Steve's Aircraft

View record

ST01000CHLanding gear and brakesRevised Apr 18, 2007

Installation of AlliedSignal Flight Data Recorder and new sensors; for control wheel & rudder pedal position as well as aileron, rudder and elevator surface position.

FAA holder: Canard Aerospace Corporation

View record

ST01249NYLanding gear and brakesRevised Feb 7, 2007

Installation of Take-off Configuration Test Switch and Nose Landing Gear Pin Position Switch.

FAA holder: Aero Consulting Services Ltd

View record

ST511CHLanding gear and brakesRevised Nov 28, 2006

Eliminate 27,000 landing cycle life limit of the landing gear by placing aircraft on an inspection program described by the Murray Aviation document titled CASA C212-200 Series Aircraft Landing Gear Continued Airworthiness Limitations , no revision, dated January 23, 1996, or later FAA Approved Revision.

FAA holder: Presidential Airways Inc

View record

SH7054NMLanding gear and brakesRevised Oct 31, 2006

Installation of a skid toe mounted convex mirror for sling load operations.

FAA holder: Heli-Support Inc.

View record

SA138SOLanding gear and brakesRevised Oct 6, 2006

D18S landing gear 404-188400 on C18S.

FAA holder: Staggerwing Museum Foundation Inc.

View record

SA2-1230Landing gear and brakesRevised Oct 6, 2006

Installation of extended tail wheel assembly.

FAA holder: Staggerwing Museum Foundation Inc.

View record

SA2-1261Landing gear and brakesRevised Oct 6, 2006

Install Fiberglas bubble tail wheel enclosure doors (enclosing entire wheel).

FAA holder: Staggerwing Museum Foundation Inc.

View record

SA2-338Landing gear and brakesRevised Oct 6, 2006

Installation of two (2) 25,000 BTU Janitrol Heaters installed one (1) in each wheel well.

FAA holder: Staggerwing Museum Foundation Inc.

View record

SA3-383Landing gear and brakesRevised Oct 6, 2006

Beech D18S Goodyear wheels and brake assembly.

FAA holder: Staggerwing Museum Foundation Inc.

View record

SA31SOLanding gear and brakesRevised Oct 6, 2006

Tricycle landing gear and revised nose assembly with optional radome. (Model may also be designated as Conrad 10,200.).

FAA holder: Staggerwing Museum Foundation Inc.

View record

SA4-128Landing gear and brakesRevised Oct 6, 2006

Engines, propellers, revised nacelles, wheel-well doors, air- speed system, fuel system and elevator seal strips.

FAA holder: Staggerwing Museum Foundation Inc.

View record

SA4-152Landing gear and brakesRevised Oct 6, 2006

Two Model 940 Stewart-Warner heaters, install one in each wheel well.

FAA holder: Staggerwing Museum Foundation Inc.

View record

SA4-34Landing gear and brakesRevised Oct 6, 2006

Main landing gear door.

FAA holder: Staggerwing Museum Foundation Inc.

View record

SA00759NYLanding gear and brakesRevised Oct 3, 2006

Installation of Northeast Engineering landing gear actuator rod.

FAA holder: Northeast Engr & Dev Ltd

View record

SA02137ATLanding gear and brakesRevised Aug 24, 2006

Installation of the Lord Corporation Nose Wheel Shimmy Damper P/N SE-1051.

FAA holder: Lord Corporation

View record

SA02138ATLanding gear and brakesRevised Aug 11, 2006

Installation of Lord Corporation nose wheel shimmy damper part number SE-1051-2/3.

FAA holder: Lord Corporation

View record

SR02116NY-DLanding gear and brakesRevised Aug 2, 2006

Installation of Nose Wheel Position Advisory System.

FAA holder: Petroleum Helicopters Inc

View record

ST00237BOLanding gear and brakesRevised Jun 9, 2006

Installation of brake control valves.

FAA holder: Learjet Inc.

View record

SA4-506Landing gear and brakesRevised Jun 8, 2006

Installation of Cessna T-50 tail wheel assembly.

FAA holder: Skyhaven Inc

View record

SA02007AKLanding gear and brakesRevised May 23, 2006

Installation of main landing gear long step no. 3195.

FAA holder: F Atlee Dodge Aircraft Service

View record

SA02269AKLanding gear and brakesRevised May 4, 2006

Installation of a 6.00-6 type III wheel and 6.00/7.00-6, 6-ply type III tire using a Cessna 310 nose fork and operated as a tail wheel on DHC-2 Series airplanes.

FAA holder: Tailwind Aviation Inc

View record

SA111WELanding gear and brakesRevised May 1, 2006

Installed Volpar Mark IV tricycle landing gear.

FAA holder: SOUTHWESTERN AERO EXCHANGE INC.

View record

SA1171WELanding gear and brakesRevised May 1, 2006

Installation of two AiResearch TPE331 Series engines, tricycle landing gear, wing platform modifications, and related modifications.

FAA holder: SOUTHWESTERN AERO EXCHANGE INC.

View record

SA1832WELanding gear and brakesRevised May 1, 2006

Installation of Volpar Tricycle Landing Gear.

FAA holder: SOUTHWESTERN AERO EXCHANGE INC.

View record

SA2204WELanding gear and brakesRevised May 1, 2006

Installation of 2 AiResearch TPE331-1 series turbo prop engines with Hartzell HCB3TN propellers: 8-1/2 inches extension of fuselage and ventral fin, tricycle landing gear installation and related modifications.

FAA holder: SOUTHWESTERN AERO EXCHANGE INC.

View record

SA01657SELanding gear and brakesRevised Mar 14, 2006

Fabrication of Robair main landing gear lower support fairing .

FAA holder: Robair Repair

View record

SA4-1397Landing gear and brakesRevised Feb 27, 2006

Installation of Tricycle landing gear and nose assembly.

FAA holder: SOUTHWESTERN AERO EXCHANGE INC.

View record

SA4-1531Landing gear and brakesRevised Feb 27, 2006

Installation of Tricycle landing gear and revised nose assembly with optional radome.

FAA holder: SOUTHWESTERN AERO EXCHANGE INC.

View record

SA01063CHLanding gear and brakesRevised Feb 16, 2006

Installation of a Scott Model 3200 Tail Wheel with the AESI #T.S.05P Tail Spring.

FAA holder: Univair Aircraft Corporation

View record

SA2318NMLanding gear and brakesRevised Jan 26, 2006

Fabrication of North River Aviation model 8400 brake booster assemblies, and modification of Scott Aviation model B-711 brake master cylinders by installation of said assemblies.

FAA holder: Northern Piper Aviation Inc.

View record

SA3633NMLanding gear and brakesRevised Jan 26, 2006

Fabrication of North River Avia. Model 8400 brake booster assembly, and modify Scott Avia. Model B-711 brake master cylinders.

FAA holder: Northern Piper Aviation Inc.

View record

SA3634NMLanding gear and brakesRevised Jan 26, 2006

Fabrication of North River Avia. Model 8400 brake booster assembly, and modifcation of Scott Aviation Model B-711 brake master cylinders.

FAA holder: Northern Piper Aviation Inc.

View record

SA3635NMLanding gear and brakesRevised Jan 26, 2006

Fabrication of North River Model8400 brake booster assembly and modification of Scott Aviation Model B-711 brake master cylinders.

FAA holder: Northern Piper Aviation Inc.

View record

SA4629NMLanding gear and brakesRevised Jan 26, 2006

Fabrication of Model 8400 brake booster assemblies, and modification of Scott Aviation Model B-711 brake master cylinders by installation of said assemblies.

FAA holder: Northern Piper Aviation Inc.

View record

SA4653NMLanding gear and brakesRevised Jan 26, 2006

Fabrication of Model 8400 brake booster assembly, and modification of Scott Aviation Model B-711 brake master cylinder by installation of said assembly. (PA-22-108 SN 22-8000 thru 22-9848).

FAA holder: Northern Piper Aviation Inc.

View record

SA7974SWLanding gear and brakesRevised Jan 10, 2006

Installation of wheel pant fairings.

FAA holder: Dallas Metroplex Aviation

View record

ST01369WI-DLanding gear and brakesRevised Dec 23, 2005

Installation of the M45 Updated Nose Wheel Steering and Spoiler/Spoileron Computers.

FAA holder: Learjet Inc

View record

SA945NELanding gear and brakesRevised Nov 30, 2005

Gross weight increase (6,000 lbs. when operated on wheels, wheel/skis and floats and 5950 lbs. when operatedon amphibious floats on land). (DHC-2 (L-20A) MK.III turbo Beaver).

FAA holder: Viking Air Limited

View record

ST01619SELanding gear and brakesRevised Nov 10, 2005

Fabrication of Honeywell International, Inc. (Honeywell) wheel assembly part number 2615901-1, Revision C, dated June 7, 2005 or later Federal Aviation Administration (FAA) approved revision and/or brake assembly part number 2615902-1, Revision C, dated July 15, 2005 or later FAA approved revision.

FAA holder: Honeywell International Inc

View record

ST01833LALanding gear and brakesRevised Oct 28, 2005

Installation of brake components.

FAA holder: NASCO Aircraft Brake Inc

View record

ST03183ATLanding gear and brakesRevised Oct 26, 2005

Installs Goodyear Radial Tire size 1050x395R16, P/N 109Q89-1 on Airbus A330 and A340 Nose Landing Gear.

FAA holder: Goodyear Tire and Rubber Company

View record

SH288NWLanding gear and brakesRevised Aug 19, 2005

Installation of Hiller landing gear float kit No. 44012. (UH-12E modified per STC SH178WE).

FAA holder: Siam Hiller Holdings Inc

View record

SA03139ATLanding gear and brakesRevised Aug 18, 2005

Conversion of Cessna Models 182, 182A, 182B, 182C, and 182D from a Tricycle Landing Gear (nose wheel) to a Conventional Landing Gear (tail wheel) configuration.

FAA holder: Rawson Rod

View record

SA290WELanding gear and brakesRevised Aug 12, 2005

Main landing gear doors.

FAA holder: Staggerwing Museum Foundation Inc.

View record

ST02062CHLanding gear and brakesRevised Jul 18, 2005

Install Aircraft Braking Systems Corporation (ABSC) Nose Landing Gear Wheel Assembly 9550267-6A or 9550267-7A.

FAA holder: Aircraft Braking Systems Corporation

View record

ST01567SELanding gear and brakesRevised Jun 20, 2005

Fabrication of Honeywell Aircraft Landing Systems (ALS) brake assembly part number 2615512-2 and/or wheel assembly part number 2615511-1.

FAA holder: Honeywell International Inc

View record

SA02244AKLanding gear and brakesRevised Jun 8, 2005

Fabrication and installation of Airglas, Inc., Model LH4000 hydraulically retractable wheel skis.

FAA holder: Airglas Inc.

View record

ST03099ATLanding gear and brakesRevised May 19, 2005

Installation of a Replacement Landing Gear Wiring Harness.

FAA holder: Chippewa Aerospace, Inc.

View record

SH287NWLanding gear and brakesRevised May 13, 2005

Installation of Hiller landing gear float kit No. 44012. (UH-12d (ARMY UH-23D modified per STC SH177WE).

FAA holder: Siam Hiller Holdings Inc

View record

ST02083NYLanding gear and brakesRevised May 6, 2005

Installation of structural reinforcements and landing gear placards.

FAA holder: Field Aviation East Limited

View record

SA507CHLanding gear and brakesRevised Apr 22, 2005

Installation of Cleveland based hydraulic toe brake rudder pedal system.

FAA holder: Aero Fabricators Co

View record

SA02236AKLanding gear and brakesRevised Mar 29, 2005

Fabrication and installation of F. Atlee Dodge Heavy Duty Standard Length Main Landing Gear, P/N 3225A, in accordance with F. Atlee Dodge Master Data List No. 3225-1.5, Revision: None dated March 14, 2005, or later FAA approved revisions.

FAA holder: F Atlee Dodge Aircraft Service

View record

SR01430LALanding gear and brakesRevised Mar 21, 2005

Installation of Stainless Steel Skid shoes.

FAA holder: Papas Gary Los Angeles Laboratories Inc.

View record

ST01595LA-DLanding gear and brakesRevised Mar 3, 2005

Installation of Control Wheel Lighted Chart Holders.

FAA holder: Learjet Inc.

View record

SR01136SELanding gear and brakesRevised Mar 1, 2005

Fabrication of AMC AM369A6200-45, -46, -57, -58 Landing Gear Fillet Fairings and AM369H6200-73, and -74 Landing Gear Fairing Guides per AMC Master Drawing List No. MDL-AMC-003, Rev A, dated August 29, 2002 or later FAA approved revision; and installation of this assembly in accordance with the Maintenance Manual for the rotorcraft, document number CSP-HMI-2, Rev 21, or later FAA approved revision.

FAA holder: Aerometals

View record

SR01204SELanding gear and brakesRevised Mar 1, 2005

Fabrication of AMC AMC369H92827 pin, clevis-rotor brake.

FAA holder: Aerometals

View record

SA02234AKLanding gear and brakesRevised Jan 13, 2005

Installation of a high Pressure Brake Master Cylinder assembly DCA1248-1260.

FAA holder: Dakota Cub Aircraft Inc

View record

SH7951SWLanding gear and brakesRevised Jan 12, 2005

Installation of the Kaflex rotor brake modification.

FAA holder: Kamatics Corporation

View record

ST01273WI-DLanding gear and brakesRevised Jan 4, 2005

Installation of a Main Landing Gear Door Actuator Modification Kit on Learjet Model 45 aircraft in accordance with FAA Approved Master Drawing List M100451ICT, Revision B dated December 21, 2004, FAA approved January 4, 2005, or later FAA Approved Revision.

FAA holder: Learjet Inc

View record

ST02037CHLanding gear and brakesRevised Sep 20, 2004

Installation of Michelin main landing gear tires.

FAA holder: World Harvest Church

View record

SA3987WELanding gear and brakesRevised Sep 3, 2004

Increase in takeoff gross weight to 9, 465 pounds and installation of wing spar reinforcement, modified tail wheel fork and truss assembly, metal covered control surfaces, and rectangular windows for installation on model AT-11, serial numbers 41-9486 and 6501.

FAA holder: Staggerwing Museum Foundation Inc.

View record

SH1510SOLanding gear and brakesRevised Sep 3, 2004

Installation of external cargo rack and work platform between the skid gears. Limited to installation on serial number 911079D.

FAA holder: Haverfield Corporation

View record

SA1158NWLanding gear and brakesRevised Jun 25, 2004

Installation of an auxiliary electric Hydraulic Pump System in accordance with Simuflight, Seattle Modification and Installation Procedure Instruction Report SS-900. NOTE: This system augments the existing manually operated hydraulic system for the landing gear and flap operation.

FAA holder: McHugh Aviation Inc

View record

SA1244NWLanding gear and brakesRevised Jun 25, 2004

Installation of a machined wrought 2024-T351 tail wheel collar (Republic P/N 1126) in place of a die-forged 2014-T6 original part in accordance with Simuflight, Seattle Drawing Number SP-2000.

FAA holder: McHugh Aviation Inc

View record

SA2925WELanding gear and brakesRevised Jun 4, 2004

Installation of power brake and skid control system.

FAA holder: W Morgan Hetrick

View record

SA3373WELanding gear and brakesRevised Jun 4, 2004

Installation of Hydro-Aire power brake/skid control system.

FAA holder: W Morgan Hetrick

View record

SA2262SWLanding gear and brakesRevised Apr 30, 2004

Modification of hydraulic brake system.

FAA holder: L-3 Communications Integrated Systems LP

View record

SA02839ATLanding gear and brakesRevised Apr 13, 2004

Modification of the main landing gear bulkhead to improve static strength and fatigue characteristics.

FAA holder: Aircrafters of Enterprise Inc

View record